Architectural & Mechanical DWG’s
Mechanical PDF’s with layers enabled in the pdf file.
Supplement your staff at crunch time
Meet impossible deadlines with confidence
Double-check and bullet-proof your plans
Provide a second, expert opinion
3D SITE PLANS
The opening page is the most important within BMS systems. It leaves the first impression on the customer. The best method to impress your customer is with the 3D Site Plan of the project along with equipment status and alarms. The site plan may also be used as mouseover feedback to jump to floors within the project. Take a look at our samples and feel free to reach us for site plan quotes.
8 inputs are provided, which can be configured as follows:
|M/TIO-U||120 Vac||Modbus RTU Slave|
|M/TIO-H||230 Vac||Modbus RTU Slave|
|M/TIO-L||24 Vac||Modbus RTU Slave|
Five relay outputs are provided, each with 5A rating. Triac
2 Triac outputs are provided with flexible configuration options, allowing control of on/off thermoelectric (PWM) or floating actuators or relays. The triacs can be independently configured to control different loads. However, due to internal connections, all loads must be supplied from the same AC voltage. Floating (three-position) configuration requires the use of both triacs.
Four 0-10VDC analog outputs are provided for controlling modulating valve or damper actuators. Two of these points can be configured to function as digital inputs.
Upto two RK4 relay modules can be connected to the device with a ribbon cable, providing up to a total of 8 additional relay outputs.
4 time-schedules can each be independently associated with a relay output through configuration parameters. Each schedule allows 28 sets of start/stop times per week.