(512) 540-3010
Log in


Ontrol Sedona Controllers

From 24 February 2017 15:00 until 24 February 2017 16:00
Posted by alper uzmezler
Categories: Webinars
Hits: 331

Gotomeeting event takes place only if someone registers. Please verify registering on the system.

This will be held in GotoMeeting Live session

1. Please join my meeting.


2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Dial +1 (805) 309-0010
Access Code: 676-610-992
Audio PIN: Shown after joining the meeting

Meeting ID: 676-610-992

GoToMeeting® Online Meetings Made Easy®

Not at your computer? Click the link to join this meeting from your iPhone®, iPad®, Android® or Windows Phone® device via the GoToMeeting app.

P-ION Sedona Programmable Controller

P-ION series products are universal programmable controllers that can be used to manage a variety of building systems including heating, ventilation, air-conditioning (HVAC) systems. Basic and advanced control strategies can be programmed by Sedona Framework ™ for optimized performance.

R-ION Programmable touch-screen Sedona Controller

R-ION series products are programmable room controllers ideal for managing a wide range of individual building products such as fan-coil units and VAV boxes.

Extremely flexible customization options are available thanks to configurable color touchscreen, full programmability and custom logo placement options.

In addition to basic fan-speed and temperature settings, lighting controls can easily be integrated, as well as custom application specific functions (e.g. Do Not Disturb / Make Up Room buttons for hotel rooms)

R-ION controllers support various industry standard protocols simultaneously. The main supervisory system communication (Port 1) is serial RS485 or wireless IP depending on basic version:

RK4 Relay Module

RK4 is intended for use with various Ontrol controllers, or other BMS systems, to enable on/off switching of loads. It provides 4 independently switchable relays. For each relay, both normally-open and normally-closed contacts are available for wiring. LEDs indicate status of the relays and supply voltage.

RK4 has two modes of operation.

  • Analog Control: A 0-10 V input is provided for controlling each relay independently. In this mode, the RK4 is a general-purpose analog-to digital converter that can be used with any BMS controller. See specifications for switching voltages.
  • Ribbon-cable connection : When connected to a compatible Ontrol controller via the ribbon cable connection, the relays are directly controlled by the attached controller. In this case, analog input terminals are not used.



Event repeats