(512) 540-3010
info@bassg.com
Log in

Register


Ontrol Sedona Controllers

From 17 February 15:00 until 17 February 16:00
Posted by alper uzmezler
512-540-3010
Categories: Webinars
Hits: 235

Gotomeeting event takes place only if someone registers. Please verify registering on the system.

This will be held in GotoMeeting Live session

1. Please join my meeting.

https://global.gotomeeting.com/join/676610992

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Dial +1 (805) 309-0010
Access Code: 676-610-992
Audio PIN: Shown after joining the meeting

Meeting ID: 676-610-992

GoToMeeting® Online Meetings Made Easy®

Not at your computer? Click the link to join this meeting from your iPhone®, iPad®, Android® or Windows Phone® device via the GoToMeeting app.

P-ION Sedona Programmable Controller

P-ION series products are universal programmable controllers that can be used to manage a variety of building systems including heating, ventilation, air-conditioning (HVAC) systems. Basic and advanced control strategies can be programmed by Sedona Framework ™ for optimized performance.

R-ION Programmable touch-screen Sedona Controller

R-ION series products are programmable room controllers ideal for managing a wide range of individual building products such as fan-coil units and VAV boxes.

Extremely flexible customization options are available thanks to configurable color touchscreen, full programmability and custom logo placement options.

In addition to basic fan-speed and temperature settings, lighting controls can easily be integrated, as well as custom application specific functions (e.g. Do Not Disturb / Make Up Room buttons for hotel rooms)

R-ION controllers support various industry standard protocols simultaneously. The main supervisory system communication (Port 1) is serial RS485 or wireless IP depending on basic version:

RK4 Relay Module

RK4 is intended for use with various Ontrol controllers, or other BMS systems, to enable on/off switching of loads. It provides 4 independently switchable relays. For each relay, both normally-open and normally-closed contacts are available for wiring. LEDs indicate status of the relays and supply voltage.

RK4 has two modes of operation.

  • Analog Control: A 0-10 V input is provided for controlling each relay independently. In this mode, the RK4 is a general-purpose analog-to digital converter that can be used with any BMS controller. See specifications for switching voltages.
  • Ribbon-cable connection : When connected to a compatible Ontrol controller via the ribbon cable connection, the relays are directly controlled by the attached controller. In this case, analog input terminals are not used.

 

 


Event repeats